Optics ready plates for Sig P320-M17

This collection contains optic plates for the Sig P320-M17. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot.

Footprints for the Sig P320-M17

• Trijicon RMR: plates from 2BME (with rear sight), Night Fision and 2BME.
• Shield RMSc: a plate from Shield Sights (with rear sight).
• Holosun K-series: a plate from 2BME.
• Aimpoint Acro: a plate from 2BME (with rear sight).
• Holosun EPS: a plate from 2BME.

Plates for several footprints

• Outer Impact type C: Trijicon RMR, Docter and C-More RTS.
• Outer Impact type S: Shield RMSc, Holosun K-series and Leupold DPP.
• Toni System type I: Trijicon RMR, Shield RMSc and Leupold DPP.
• Toni System type H: Docter and C-More RTS.

The type letters differ between makers. Always read the footprints in the brackets.

Plates with a rear sight

Some plates have an integrated rear sight, so you keep iron sights with the red dot mounted. You aim through the red dot and still have a sight picture if it fails. Here they are made by 2BME, Outer Impact, Shield Sights and Toni System for the RMR, RMSc, K-series, DPP, Docter, RTS and Acro footprints.

Material

2BME, Outer Impact, Toni System and Night Fision make their plates from aluminium.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

For all plates of this brand, see Optics ready plates for Sig models.

Frequently asked questions

Can I install an optic plate on my Sig P320-M17 at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my Sig P320-M17?

It depends on the plate you choose. For the Sig P320-M17 we have plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS, Aimpoint Acro and Holosun EPS footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.

Can I keep iron sights with a red dot on the Sig P320-M17?

Yes. Take a plate with an integrated rear sight. You aim through the red dot and still have iron sights if the red dot fails.