Optics ready plates for HS Produkt SF19 Optics Ready

This collection contains optic plates for the HS Produkt SF19 Optics Ready. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot. On these plates, the rear sight has to be removed for the plate to fit. For the Springfield XDM OSP, HS Produkt XDM OSP, Springfield XDM Elite OSP and Springfield XD OSP, see Optics ready plates for Springfield XDM OSP, Optics ready plates for HS Produkt XDM OSP, Optics ready plates for Springfield XDM Elite OSP and Optics ready plates for Springfield XD OSP.

Plates for several footprints

• Toni System type A: Shield RMSc, Leupold DPP and Docter.
• Toni System type B: Trijicon RMR and C-More RTS.

The type letters differ between makers. Always read the footprints in the brackets.

Material

Toni System makes its plates from aluminium.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.

For iron sights, see Sights for HS Produkt SF19 RDR. For all plates of this brand, see Optics ready plates for HS Produkt models.

Frequently asked questions

Can I install an optic plate on my HS Produkt SF19 Optics Ready at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my HS Produkt SF19 Optics Ready?

It depends on the plate you choose. For the HS Produkt SF19 Optics Ready we have plates for the Trijicon RMR, Shield RMSc, Leupold DPP, Docter and C-More RTS footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.