Optics ready plates for Beretta M9A4

(7 products)

This collection contains optic plates for the Beretta M9A4. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot.

Footprints for the Beretta M9A4

Trijicon RMR: a plate from Beretta.
Leupold DPP: a plate from Beretta.
Docter: a plate from Beretta.
C-More RTS: a plate from Beretta.
Aimpoint Acro: a plate from Beretta.

Plates for several footprints

Toni System type B: Trijicon RMR and C-More RTS.
Toni System type A: Shield RMSc, Leupold DPP and Docter.

The type letters differ between makers. Always read the footprints in the brackets.

Material

Toni System and Beretta make their plates from aluminium.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Plate	Footprints	Maker
Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate	Aimpoint Acro footprint, C-More RTS footprint, Docter footprint, Leupold DPP footprint, Trijicon RMR footprint	Beretta
Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate	type A [RMSc, DPP, Docter footprint], type B [RMR & RTS footprint]	Toni System

Which red dot for which footprint

Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.
Aimpoint Acro: enclosed red dots such as the Steiner MPS. See Red dots with Aimpoint Acro footprint.

For all plates of this brand, see Optics ready plates for Beretta models.

Frequently asked questions

Can I install an optic plate on my Beretta M9A4 at home?

Yes. You need no gunsmith and no milling.

Remove the cover plate from the optic cut.
Screw the optic plate into the cut.
Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my Beretta M9A4?

It depends on the plate you choose. For the Beretta M9A4 we have plates for the Trijicon RMR, Shield RMSc, Leupold DPP, Docter, C-More RTS and Aimpoint Acro footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.