Red dot mounts for Glock 19

(10 products)

This collection contains red dot mounts for the Glock 19. The mount goes into the rear sight dovetail in place of the rear sight. You fit a red dot without milling and without permanent changes, and you can put the rear sight back at any time. Every mount takes one footprint or a group of footprints, so you choose it by the footprint of your red dot. The mounts are not for Optics Ready variants with a factory optic cut. For the Glock 26, see Red dot mounts for Glock 26.

Footprints for the Glock 19

Trijicon RMR: a mount from EGW.
Shield RMSc: mounts from Zendl and Angry Bear.
Holosun K-series: a mount from Angry Bear.

Mounts for several footprints

Outer Impact type C: Trijicon RMR, Docter and C-More RTS.
Outer Impact type S: Shield RMSc, Holosun K-series and Leupold DPP.
Toni System type A: Shield RMSc, Leupold DPP and Docter.
EGW type S: .
Toni System type B: Trijicon RMR and C-More RTS.
Holosun type D: Trijicon RMR and Docter.

The type letters differ between makers. Always read the footprints in the brackets.

Material

Zendl makes its mounts from steel. Outer Impact, Toni System, EGW, Angry Bear and Holosun make their mounts from aluminium. An aluminium mount is lighter. A steel mount is heavier and robust.

Installation

Drift the rear sight out of the dovetail with a sight pusher or a punch. Push the mount into the dovetail and fix it. Then screw the red dot onto the mount with a drop of threadlocker on each screw. See Installation tools.

All mounts at a glance

Mount	Footprints	Maker
Red dot mount Glock models [G17, G19, G26 & other]	Holosun K-series footprint, Shield RMSc footprint	Angry Bear
Red dot mount Glock models [G17, G19, G26 & other]	Shield RMSc footprint	Zendl
Red dot mount Glock models [G17, G19, G26 & other]	Trijicon RMR footprint, type S [RMSc, DPP, K-series footprint]	EGW
Red dot mount Glock models [G17, G19, G26 & other]	type A [RMSc, DPP, Docter footprint], type B [RMR & RTS footprint]	Toni System
Red dot mount Glock models [G17, G19, G26 & other]	type C [RMR, RTS, Docter footprint], type S [RMSc, DPP, K-series footprint]	Outer Impact
Red dot mount Glock models [G17, G19, G26 & other]	type D [RMR & Docter footprint]	Holosun

For iron sights, see Sights for Glock 19. For all mounts of this brand, see Red dot mounts for Glock models.

Frequently asked questions

Can I put a red dot on my Glock 19 without an optic cut?

Yes. The mount goes into the rear sight dovetail in place of the rear sight. No milling and no permanent changes.

Can I install the mount at home?

Yes, if you have a sight pusher or a punch.

Drift the rear sight out of the dovetail.
Push the mount into the dovetail and tighten it.
Screw the red dot onto the mount with a drop of threadlocker on each screw.

Which red dots will fit?

It depends on the mount you choose. For the Glock 19 we have mounts for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter and C-More RTS footprints. Find the footprint of your red dot in its specifications and take the mount that names it.

My Glock 19 is Optics Ready. Will these mounts fit?

No. A pistol with a factory optic cut takes an optic plate, not a mount.