Red dot adapters for HS Produkt models

This collection brings together every red dot adapter we have for HS Produkt models: optics ready plates for HS Produkt models with a factory optic cut, and red dot mounts for HS Produkt models without one. Pick your model above and you see only the plates or mounts that fit it.

Plate or mount: which one does your HS Produkt model take

• Optics Ready HS Produkt models have a factory optic cut in the slide, closed with a cover plate. They take an optics ready plate. The plate goes into the cut and connects it to the footprint of your red dot.
• HS Produkt models without an optic cut take a red dot mount. The mount replaces the rear sight in its dovetail. You need no slide milling and no permanent modifications.

A mount does not fit an Optics Ready model, and a plate does not fit a model without the cut. Choose your exact model, including the Optics Ready (OR) or MOS part of its name.

Optics Ready HS Produkt models

We have optic plates for HS Produkt pistols with a factory optic cut. HS Produkt makes pistols that Springfield sells under its own names. The plates therefore fit both brands. Plates are available for the SF19 RDR, XDM OSP, H11 OR and Echelon.

Which plate fits which model

• SF19 RDR and XDM OSP: the plates also fit the Springfield XD OSP and XDM OSP. Toni System type A fits Shield RMSc, Leupold DPP and Docter. Type B fits Trijicon RMR and C-More RTS. See Optics ready plates for HS Produkt SF19 Optics Ready and Optics ready plates for HS Produkt XDM OSP.
• H11 OR: the plates also fit the Springfield Hellcat OSP. They take the Trijicon RMR or the Holosun K-series footprint. See Optics ready plates for HS Produkt H11 Optics Ready.
• Echelon: the plate also fits the Springfield Echelon. It takes the Aimpoint Acro. See Optics ready plates for HS Produkt Echelon.

On some of these plates, you must remove the rear sight for the plate to fit.

Installation

Remove the factory cover plate from the optic cut. Screw the optic plate into its place, then screw the red dot onto the plate. No milling is needed and you can do it yourself. Threadlocker on the screws is recommended.

HS Produkt models without an optic cut

We have red dot mounts for HS Produkt pistols without an optic cut. HS Produkt makes the pistols that Springfield sells as XD, XDM and XDS. The same mounts fit both brands. The mount replaces the rear sight. It does not fit the Optics Ready (OSP) variants.

Which mount fits which model

• XDM, HS-9 and XDS: one mount family. It also fits the Springfield XD, XDM and XDS. See Red dot mounts for HS Produkt XDM and Red dot mounts for HS Produkt HS-9.
• SF19 5.25" and XDM 5.25": the long-slide models have their own mounts, Toni System type A and B. They also fit the Springfield XDM 5.25". See Red dot mounts for HS Produkt SF19 5.25.

Footprints

• Single footprints: Trijicon RMR, Shield RMSc and Docter.
• Toni System type A: Shield RMSc, Leupold DPP and Docter.
• Toni System type B: Trijicon RMR and C-More RTS.
• Outer Impact type C: Trijicon RMR, C-More RTS and Docter.
• EGW type S: Shield RMSc, Leupold DPP and Holosun K-series.

Zendl in the Czech Republic makes a steel mount. The other mounts are aluminium.

Which red dot for which footprint

Which red dots go on which footprint, with examples from our range:

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.
• Holosun K-series: the Holosun 407K and 507K, EPS Carry and SCS Carry. See Red dots with Holosun K-series footprint.

Footprints by mount

• XDM, HS-9 and XDS: single mounts for Trijicon RMR (EGW), Shield RMSc (Shield Sights and Zendl) and Docter (EGW). Toni System type A and B, Outer Impact type C and type S from EGW and Outer Impact.
• SF19 5.25" and XDM 5.25": Toni System type A and type B only.

All red dot mounts at a glance

The table lists every product in this page. The middle column gives the footprints, so you can check at once which red dots it takes.

Mount	Footprints	Maker
Springfield XDM 5.25", HS Produkt SF19 5.25" red dot mount	type A [RMSc, DPP, Docter footprint], type B [RMR & RTS footprint]	Toni System
Springfield [XD, XDM, XDS] & HS Produkt [XDM, HS-9, XDS] red dot mount	Shield RMSc footprint	Shield Sights
Springfield [XD,XDM, XDS] & HS [XDM, HS-9, XDS] red dot mount	Docter footprint, Trijicon RMR footprint, type S [RMSc, DPP, K-series footprint]	EGW
Springfield [XD,XDM, XDS] & HS [XDM, HS-9, XDS] red dot mount	Shield RMSc footprint	Zendl
Springfield [XD,XDM, XDS] & HS [XDM, HS-9, XDS] red dot mount	type A [RMSc, DPP, Docter footprint], type B [RMR & RTS footprint]	Toni System
Springfield [XD,XDM, XDS] & HS [XDM, HS-9, XDS] red dot mount	type C [RMR, RTS, Docter footprint], type S [RMSc, DPP, K-series footprint]	Outer Impact

Installation

Drift the rear sight out of the dovetail with a sight pusher or a punch. Push the mount into the same dovetail and fix it. Then screw the red dot onto the mount. No slide milling or permanent modifications are needed. See Installation tools.

Related collections

For iron sights, see Sights for HS Produkt models. For the tools you need, see Installation tools. For other brands, see Red dot adapters.

Frequently asked questions

Can I install an optic plate on my HS Produkt at home?

Yes. No milling is needed, and you can do it yourself.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my HS Produkt?

It depends on the plate you choose. Every plate takes one footprint or a group of footprints. For HS Produkt pistols we have plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS and Aimpoint Acro footprints.

Choose your red dot first and find its footprint in the specifications. Then take the plate with the same footprint.

Do Springfield plates fit my HS Produkt?

Yes, where the plate names both brands. The plates for the Springfield XD OSP and XDM OSP fit the HS SF19 RDR and XDM OSP. The plates for the Hellcat OSP fit the H11 OR. The Echelon plate fits both Echelons.

Do I have to remove the rear sight?

Yes, for the Toni System plates for the SF19 RDR and XDM OSP. The plate fits only with the rear sight removed.

Can I put a red dot on my HS Produkt without an optic cut?

Yes. The mount goes into the rear sight dovetail in place of the rear sight. No milling and no permanent changes, so you can put the rear sight back at any time.

Can I install the mount at home?

Yes, if you have a sight pusher or a punch.

1. Drift the rear sight out of the dovetail.
2. Push the mount into the dovetail and tighten it.
3. Screw the red dot onto the mount with a drop of threadlocker on each screw.

You find the tools in Installation tools.

Does the XDM mount fit my XDM 5.25"?

No. The 5.25" models have their own mounts.

My SF19 RDR is Optics Ready. Will these mounts fit?

No. A pistol with a factory optic cut takes an optic plate, not a mount. See Optics ready plates for HS Produkt models.