Optics ready plates for FB

This collection contains optic plates for the FB MPS pistol with a factory optic cut. The plate goes into the optic cut and takes a red dot with a matching footprint.

Two footprints

There are two plates, both machined by 2BME in Poland from aircraft aluminium:

• One for red dots with a Shield RMSc footprint.
• One for red dots with a Trijicon RMR footprint.

The RMSc footprint is common on compact red dots. The RMR footprint is common on full-size pistol red dots.

Installation

Remove the factory cover plate from the optic cut. Screw the optic plate into its place, then screw the red dot onto the plate. No milling is needed and you can do it yourself. Threadlocker on the screws is recommended.

For optic plates for other brands, see Optics ready plates.

Frequently asked questions

Can I install an optic plate on my FB MPS at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my FB MPS?

Red dots with the Trijicon RMR or the Shield RMSc footprint. We have a 2BME plate for each of them. Find the footprint of your red dot in its specifications and take the plate with the same footprint.